Have a look at the manual for your specific RP23 or download it from the fox website. The propedal settings for my RP23 are. I just got a Fox RP23 shock. Just follow directions on the Fox website. Your bikes manual should be able to tell you how much sag you. Here’s a quick overview of how to set up your Fox RP23 rear shock for best performance.

Author: Migrel Goltishura
Country: Azerbaijan
Language: English (Spanish)
Genre: Personal Growth
Published (Last): 7 November 2013
Pages: 81
PDF File Size: 2.72 Mb
ePub File Size: 20.53 Mb
ISBN: 221-5-12430-923-5
Downloads: 24701
Price: Free* [*Free Regsitration Required]
Uploader: Kezshura

Rebound controls the rate at which your shock returns after it has been compressed. If you can find your bikes manual on-line you should be able to get the intiial setup info in that, most people will then adjust this to suit their own riding style.

To determine which ProPedal position is better for your condition and situation, pedal the bicycle and monitor the shock movement. As above shock rated for upto psi, this may overwhelm the damping though rebound so may need a tune to keep it slow enough. You can also view a Flash video on Setting Sag.

fox float rp23-air pressure

Thanks Posted 6 years ago. It should only be adjusted while in manuao stationary position. No good — he has a DT shock. For slower reboundturn the red adjuster r2p3 clockwise. Air Spring Setting Guidelines.


Im 74kg with camelbak etc and use psi in Zesty RP What pressure do you guys run? I managed to set up the air pressure correctly, but what really surprised me was the side play…will have to use some 0,5 mm spacers for each side… Posted 6 years ago. For more precise ProPedal tuning and to further eliminate pedal-induced bob while maintaining bump compliance, adjust the ProPedal knob. Switch between positions and select the one that reduces suspension movement most effectively while providing the desired amount of bump absorption.

You do need a high amount of PSI for the Spark to pedal properly — what compress tune does the shock have? Have a look at the setup guide here: The propedal settings for my RP23 are:.

I fine the 1st pp setting does fine on ascents. Posted 6 years ago.

Depending on riding style Posted 6 years ago. I reckon not… Getting the right air pressure looks to be quite tricky too, I tried psi for my 85 kg, but after some posts here, I will probably end up a bit higher for a 9,5 mm sag… Posted 6 years ago.

fox float rpair pressure – Singletrack Magazine

Could anyone tell me from his own experience whether the settings are ok, or need to be adapted for the Kanual The ProPedal lever allows for on-the-fly ProPedal adjustment.


Use each setting to adjust the shock for different riding conditions and situations. Cleaning out the valve core helped alot too. You could try stripping and rebuilding without a new seal.

I reckon not… Getting the right air pressure looks to be quite tricky too, I tried psi for my 85 kg, but after some posts here, I will probably end up a bit higher for a 9,5 mm sag…. The two ProPedal lever settings are:. Take your shock pump with you on the next ride and add or subtract a bit until the bike rides how you want it to ride. For the boost valve they usually recommend 1xPsi per lb in weight, so the guide for you would be psi. The proper rebound setting is a personal preference, and changes with rider weight, riding style and conditions.

I run psi rear and ro23 front F and am 13st rrp23.

Have a look at the setup guide here:. It should provide a stiffer ride but still provide full suspension action. Then note pressure for future.