Examples are all over the Internet, but be aware that FaxDispatch does not go into /etc, but rather into /var/spool/hylafax/etc. Hylafax Faxdispatch I have a question about hyalafax faxdispatch. Default FaxDispatch file – routes all inbound faxes to FaxMaster as PDF. |FaxDispatch| isn’t on |/var/spool/hylafax/etc|. Where can I find it? > FaxDispatch needs to be created by you. If it was contained in the package then it would.
|Published (Last):||27 May 2010|
|PDF File Size:||2.88 Mb|
|ePub File Size:||2.46 Mb|
|Price:||Free* [*Free Regsitration Required]|
You should now be returned to the shell prompt.
For more FaxDispatch options, see http: Add this to your config. Have your modem hooked up before proceeding. Otherwise, answer yesand perform the above faxaddmodem related steps again. Press enter to answer yes Since we have not set up a modem hyladax, faxsetup will prompt you to run ‘faxaddmodem’.
Special Hylafax configuration does not appear to be necessary. You will then be asked for values specific to the modem. The non-default scheduler values will then be displayed followed by a confirmation prompt. Next, accept the default yes answer to run faxmodem on your newly configured modem to verify settings.
The Area Code may not be correct. HylaFax last modified The extension it should use. It hylwfax not necessary to send a new fax everytime to test Hylafax. When done, save the file and exit the editor. For best results use PDFs as they seem to be yylafax reliably and are already paper sized.
If you are not allowing local network users to use this fax server, you can skip this section. HylaFAX scheduler on localhost. Under Hyalfax Squeeze this is plug-and-play. Note that this allows the uucp user to change the group of any file, even files owned by other users. If you want to manually edit the file that contains these settings do so with the command:. The commercially available clients tend to be more sophisticated including the ability to view incoming faxes, but at a price.
August 15, 0. FaxDispatch FaxDispatch is a custom script that one can create for Hylafax to specify nonstandard delivery options. Because USR modem doesn’t have the un-wedged option as the Mainpine modem, you have to tell hylafax to try to set it up more then default 2 times. Press Enter to accept them. The maximum number of the serial ports you can set the kernel boot to is 16,if you need more, kernel 2.
Access Controls To allow users on the local network access to the fax server, you can use a subnet wide rule faxdispatxh let everyone use it, or select individual addresses.
[hylafax-users] hylafax does not send mails after fax-reciving
You can download it faxdislatch http: Now i can do fax from OpenOffice, TextEditor, etc. Remember to restart every faxgetty when you add uucp to a new group.
The groub bits thus control the uid permissions while the other bits control the other permissions. FaxDispatch can now be used to give the received faxes to the right users.
The FaxDispatch script is run as a shell script, so can use whatever features your default shell has. Make sure all these values are correct. Press enter to faddispatch yes Enter the device name of the serial port your fax-modem is attached to make sure your modem is connected to serial port not the parallel port.
If this step fails, there is a likely a communication problem with your modem. HylaFAX scheduler on localhost: The file in recvq must already be present and with proper permissions, presumeably it’s leftover from a previous fax.
Ubuntu – Debian – How To Set Up HylaFax Linux Fax Server
Add this line to config. Even if your modem supports both Class 1 and Class 2 you should set it to Class 1 to ensure compatibility with all fax machines.
For a user to received fax-related mail enter the user account you created for yourself during the Debian installation. HylaFAX configuration parameters are: It’s not necessary or required to change the homedir back.